Academy
Spot leak detector vs flow measurement
A new technical article comparing the architectures.
Read the article
Pre-launchAQUA Contra BASIC · Sign-ups from 01-01-2027 to 15-02-2027Sign up
Home/Systems/B2C: AQUA Contra/Description
B2C · Home and small office
AQUA Contra
AQUA CONTRA BASIC is an autonomous water installation protection system based on the Siemens LOGO!8 controller. The system monitors water flow, detects events that may indicate an installation failure and controls a solenoid valve that shuts off the water supply.
01AQUA Contra description
02AQUA Contra DIY
03AQUA Contra BASIC
System functions
How AQUA Contra works.
01
Dynamic volume counter
The core protection element is a dynamic volume counter working together with the pulse water meter.
The counter totals the volume of water drawn off and automatically resets after detecting a break in flow of at least 15 seconds. Every new draw-off cycle starts from zero, so the actual volume of each individual draw-off is analysed.
Hose Threshold
This function monitors high flow rates typical of failures of flexible connectors, burst hoses or a sudden loss of tightness in the installation.
The analysis is based on the density of pulses from the water meter. Exceeding the permitted threshold triggers an immediate system response.
Spot sensors
The system works with ZAMEL wireless flood sensors operating in the 868 MHz band.
This solution was selected for compatibility with PLC automation and allows the presence of water to be detected in places particularly exposed to leaks.
Pause with automatic return
The function is activated by double-clicking a momentary push-button. The active state is indicated by an LED.
Once activated, the volume counter is suspended for 40 minutes. During this time, water can be drawn off without any volume limit, while protection by the Hose Threshold is maintained.
After 40 minutes, the system automatically returns to normal monitoring mode.
Flow watchdog
While the Pause function is running, an additional control mechanism called the Watchdog is activated.
The Watchdog monitors whether flow occurs and analyses breaks in the flow. If no flow is detected for 3 minutes, Pause mode ends automatically and the system returns to full monitoring of the installation.
“180” utility function
This function is intended for work requiring prolonged, unrestricted water draw-off.
Once activated, all of the system's protective functions are suspended for 180 minutes. During this time, no limits apply to the volume of water drawn off or to the density of pulses generated by high flow.
After 180 minutes, the system automatically returns to protection mode. The function can be switched off manually at any time.
By activating this function, the user knowingly assumes responsibility for the condition of the water installation.
Solenoid valve service mode
To reduce the risk of the solenoid valve mechanism seizing, the system automatically exercises the valve.
Every Tuesday and Thursday at 16:00, a series of five control pulses is executed. The whole cycle takes about 2.5 minutes and serves as maintenance.
Web server
The LOGO!8 controller provides a built-in web server that lets you view the system status in a web browser.
To enable this function, the controller's network parameters must be configured as described in the operating and maintenance manual (DTR).
Operation is via the controller's built-in web page.
Potential-free alarm contact
A relay output enabling integration with other building automation systems, alarm panels, GSM modules, BMS and devices that require an external signal indicating the alarm state of the AQUA CONTRA system.
System configuration
Ready to work without configuration.
02
The consumer system has been optimally parameterised by the manufacturer. All operating parameters were selected at the design stage to ensure maximum performance, stability and operational safety. These parameters cannot be modified by the end user, which eliminates the risk of incorrect system configuration. The only settings available to the user are the astronomical clock configuration and the network parameters needed to integrate the system and connect it to the network infrastructure. As a result, the system is ready for operation without any additional configuration.
User: astronomical clock User: network parameters Other parameters: factory-set
Before / after
Garage. The same failure.
03
Without a flow guard, water pours out for hours. With AQUA Contra, the supply is shut off after a few litres.
Without a guard
A burst hose at 4 bar: several dozen litres per minute.
With a flow guard
EZ OFF once the 35 L threshold is exceeded — the floor stays dry.
Components
Four components. One barrier.
04
01
Pulse water meter
Measures flow from 1 l/min
02
PLC controller
Siemens LOGO! / Eaton Easy
03
EZ solenoid valve
Shuts off the water supply
04
Flood probe
+ approx. 30% effectiveness
Test rig05
Every algorithm proven on the test bench.
On our test rig, we simulate failures of hoses, toilet cisterns and household appliances before the system reaches the customer.
Choose your application
Choose your version.
01
AQUA Contra · B2C
For homes and small offices
DIY and BASIC kits — order online, pay by bank transfer.
H-corePLC® · B2B
For businesses and investments
Residences, offices, property developers — presentation and implementation.
AQUA Contra systems for the home
For the home For business
DIY
AQUA Contra DIY
Self-assembly kit
A complete kit to assemble and install yourself.
Order via the form
PLC controller + EZ solenoid valve
Installation instructions and O&M manual
LaunchApril 2027
Details
BASIC
AQUA Contra BASIC
Basic kit
Ready-made RE distribution board — simply connect it to the installation.
Order via the form
Guard and Pause modes
Ready-made RE control cabinet
LaunchApril 2027
Details
How does AQUA Contra work?
The pulse water meter, PLC controller and solenoid valve form a barrier that responds to the cause — the flow — rather than the effect.
Deterministic protection
for your water system.
Biuro Inżynierskie Automatyki, Koszalin
+48 000 000 000
kontakt@h-coreplc.pl
Systems
AQUA Contra — overview
AQUA Contra DIY
AQUA Contra BASIC
H-corePLC® — overview
H-corePLC® szychta
H-corePLC® office
PLC2 for risers
Academy
State of the art
Case study
Flow vs spot leak detector
FAQ
About us
Our history
Our mission
Why us
Service
Partnership
Book a presentation
Property developers
Wholesalers
Design offices
Installers
Terms of sale
PDF · version 1.0
Technical, environmental and installation requirements
PDF · H-core technical specification
Privacy policy
GDPR · page
H-corePLC®
© 2026 H-corePLC® & AQUA Contra. All rights reserved.Terms · Privacy policy · Cookies
Pre-launchSign-ups 01.01–15.02.2027Sign up
Start/Systems/AQUA Contra
Systems
AQUA Contra
AQUA CONTRA BASIC is an autonomous water installation protection system based on the Siemens LOGO!8 controller. The system monitors water flow, detects events that may indicate an installation failure and controls a solenoid valve that shuts off the water supply.
01AQUA Contra description
02AQUA Contra DIY
03AQUA Contra BASIC
System functions01
How AQUA Contra works.
Dynamic volume counter
The core protection element is a dynamic volume counter working together with the pulse water meter.
The counter totals the volume of water drawn off and automatically resets after detecting a break in flow of at least 15 seconds. Every new draw-off cycle starts from zero, so the actual volume of each individual draw-off is analysed.
Hose Threshold
This function monitors high flow rates typical of failures of flexible connectors, burst hoses or a sudden loss of tightness in the installation.
The analysis is based on the density of pulses from the water meter. Exceeding the permitted threshold triggers an immediate system response.
Spot sensors
The system works with ZAMEL wireless flood sensors operating in the 868 MHz band.
This solution was selected for compatibility with PLC automation and allows the presence of water to be detected in places particularly exposed to leaks.
Pause with automatic return
The function is activated by double-clicking a momentary push-button. The active state is indicated by an LED.
Once activated, the volume counter is suspended for 40 minutes. During this time, water can be drawn off without any volume limit, while protection by the Hose Threshold is maintained.
After 40 minutes, the system automatically returns to normal monitoring mode.
Flow watchdog
While the Pause function is running, an additional control mechanism called the Watchdog is activated.
The Watchdog monitors whether flow occurs and analyses breaks in the flow. If no flow is detected for 3 minutes, Pause mode ends automatically and the system returns to full monitoring of the installation.
“180” utility function
This function is intended for work requiring prolonged, unrestricted water draw-off.
Once activated, all of the system's protective functions are suspended for 180 minutes. During this time, no limits apply to the volume of water drawn off or to the density of pulses generated by high flow.
After 180 minutes, the system automatically returns to protection mode. The function can be switched off manually at any time.
By activating this function, the user knowingly assumes responsibility for the condition of the water installation.
Solenoid valve service mode
To reduce the risk of the solenoid valve mechanism seizing, the system automatically exercises the valve.
Every Tuesday and Thursday at 16:00, a series of five control pulses is executed. The whole cycle takes about 2.5 minutes and serves as maintenance.
Web server
The LOGO!8 controller provides a built-in web server that lets you view the system status in a web browser.
To enable this function, the controller's network parameters must be configured as described in the operating and maintenance manual (DTR).
Operation is via the controller's built-in web page.
Potential-free alarm contact
A relay output enabling integration with other building automation systems, alarm panels, GSM modules, BMS and devices that require an external signal indicating the alarm state of the AQUA CONTRA system.
System configuration02
Ready to work without configuration.
The consumer system has been optimally parameterised by the manufacturer. All operating parameters were selected at the design stage to ensure maximum performance, stability and operational safety. These parameters cannot be modified by the end user, which eliminates the risk of incorrect system configuration. The only settings available to the user are the astronomical clock configuration and the network parameters needed to integrate the system and connect it to the network infrastructure. As a result, the system is ready for operation without any additional configuration.
User: astronomical clock User: network parameters Other parameters: factory-set
Before / after03
Garage. The same failure.
Without a guard
A burst hose at 4 bar.
With a guard
EZ OFF at the 35 L threshold — dry floor.
Components04
Four components. One barrier.
Pulse water meter
Flow from 1 l/min
PLC controller
Siemens LOGO! / Eaton
EZ solenoid valve
Supply shut-off
Flood probe
+ approx. 30% effectiveness
Choose your application01
Home or business?
AQUA Contra · B2C
For homes and small offices
DIY and BASIC — launch: April 2027.
H-corePLC® · B2B
For businesses and investments
Residences, offices, property developers.
For the home For business
DIY
AQUA Contra DIY
Self-assembly kit
Order via the form
PLC + EZ solenoid valve
LaunchApril 2027
Details
BASIC
AQUA Contra BASIC
Basic kit
Order via the form
Ready-made RE distribution board
LaunchApril 2027
Details
Deterministic protection
for your water system.
+48 000 000 000
kontakt@h-coreplc.pl
Koszalin
Systems
AQUA Contra — overview
AQUA Contra DIY
AQUA Contra BASIC
H-corePLC® — overview
H-corePLC® szychta
H-corePLC® office
PLC2 for risers
Academy
State of the art
Case study
Flow vs spot leak detector
FAQ
About us
Our history
Our mission
Why us
Service
Partnership
Book a presentation
Property developers
Wholesalers
Design offices
Installers
Terms of salePDF · version 1.0
Technical requirementsPDF · H-core specification
Privacy policyGDPR
H-corePLC®
© 2026 H-corePLC® & AQUA Contra
Terms · Privacy policy · Cookies